Dual Element CHIRP Transducers for CP470, CP570 and RVX1000 Sonar Modules
Professional CHIRP sonar transducers for tournament and offshore blue water fishing with the Raymarine CP470, CP570 and RVX1000 sonar modules
The CP470, CP570 and RVX1000 sonar modules require 2 elements to function. Either Low/High (LH), Low/Medium (LM) or Med/High (MH).
Choose from dual element transducers, or paired single element transducers to be connected with CHIRP Transducer Y-Cable (A102146).
Transducers
TM265LH
Transom Mount
Part Number: A80013
| Material | Urethane |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 1,000(H) |
| Frequency (KHz) | 42-65(L) / 130-210(H) |
| More specifications | |
| Beam Width | 25° / 16°(L) / 10° - 6°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-25° |
| Notes | |
| The TM265 brings CHIRP technology into a transom transducer. With up to 103kHz of CHIRP range and 8 internal ceramics this transducer has the ability to provide great target separation in both shallow and deep water. The medium element will provide better shallow water coverage under the vessel, while the high element will provide better shallow water resolution. | |
TM265LM
Transom Mount
Part Number: A80041
| Material | Urethane |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 1,500(M) |
| Frequency (KHz) | 42-65(L) / 85-135(M) |
| More specifications | |
| Beam Width | 25° / 16°(L) / 16° - 11°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-25° |
| Notes | |
| The TM265 brings CHIRP technology into a transom transducer. With up to 103kHz of CHIRP range and 8 internal ceramics this transducer has the ability to provide great target separation in both shallow and deep water. The medium element will provide better shallow water coverage under the vessel, while the high element will provide better shallow water resolution. | |
M265LH
In Hull
Part Number: A80012
| Material | Urethane |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 1,000(H) |
| Frequency (KHz) | 42-65(L) / 130-210(H) |
| More specifications | |
| Beam Width | 25° / 16°(L) / 10° - 6°(H) |
| Records | Depth |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-30° |
| Notes | |
| The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while accommodating a large range of dead rise angles. The high frequency provides excellent shallow water resolution. | |
M265LM
In Hull
Part Number: A80038
| Material | Urethane |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 1,500(M) |
| Frequency (KHz) | 42-65(L) / 85-135(M) |
| More specifications | |
| Beam Width | 25° / 16°(L) / 16° - 11°(M) |
| Records | Depth |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-30° |
| Notes | |
| The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while accommodating a large range of dead rise angles. The medium-frequency benefits include the ability to identify targets deeper than the high-frequency with benefit of a wider beam angle. | |
R111LH
In Hull
Part Number: A80012
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 6,000(L) / 1,500(H) |
| Frequency (KHz) | 38-75(L) / 130-210(H) |
| More specifications | |
| Beam Width | 19° / 10°(L) / 8° - 4°(H) |
| Records | Depth |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-22° |
| Notes | |
| The R111 contains 16 internal ceramics to provide a level of sensitivity superior to the M265. This powerhouse of a transducer will provide excellent clarity and target resolution in water both shallow and deep. The wider beam angle of the medium frequency provides improved shallow water coverage. | |
R111LM
In Hull
Part Number: A80134
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 6,000(L) / 3,000(H) |
| Frequency (KHz) | 38-75(L) / 80-130(H) |
| More specifications | |
| Beam Width | 19° / 10°(L) / 13° - 8°(M) |
| Records | Depth |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-22° |
| Notes | |
| The R111 contains 16 internal ceramics to provide a level of sensitivity superior to the M265. This powerhouse of a transducer will provide excellent clarity and target resolution in water both shallow and deep. The wider beam angle of the medium frequency provides improved shallow water coverage. | |
R599LH
In Hull
Part Number: A80212
| Material | Urethane |
| Power (RMS) | 3,000W |
| Max Depth (Ft) | 10,000(L) / 1,500(H) |
| Frequency (KHz) | 28-60(L) / 130-210(H) |
| More specifications | |
| Beam Width | 23° / 9°(L) / 8° - 4°(H) |
| Records | Depth |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-22° |
| Notes | |
| The R599 is the ultimate in-hull transducer. Featuring 25 internal ceramics and a total potential output of 3kW, this transducer will outperform any other in-hull option. | |
R599LM
In Hull
Part Number: A80213
| Material | Urethane |
| Power (RMS) | 3,000W |
| Max Depth (Ft) | 10,000(L) / 3,000(H) |
| Frequency (KHz) | 28-60(L) / 80-130(H) |
| More specifications | |
| Beam Width | 23° / 9°(L) / 13° - 8°(H) |
| Records | Depth |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-22° |
| Notes | |
| The R599 is the ultimate in-hull transducer. Featuring 25 internal ceramics and a total potential output of 3kW, this transducer will outperform any other in-hull option. | |
B75L 0°
Through Hull
Part Number: A80016
| Material | Bronze |
| Power (RMS) | 300W |
| Max Depth (Ft) | 1,200(L) |
| Frequency (KHz) | 45-70(L) |
| More specifications | |
| Beam Width | 32° / 21°(L) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B75M 0°
Through Hull
Part Number: A80017
| Material | Bronze |
| Power (RMS) | 600W |
| Max Depth (Ft) | 900(M) |
| Frequency (KHz) | 80-130(M) |
| More specifications | |
| Beam Width | 24° / 16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B75H 0°
Through Hull
Part Number: A80018
| Material | Bronze |
| Power (RMS) | 600W |
| Max Depth (Ft) | 700(H) |
| Frequency (KHz) | 130-210(M) |
| More specifications | |
| Beam Width | 15° / 9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B75L 12°
Through Hull
Part Number: A80033
| Material | Bronze |
| Power (RMS) | 300W |
| Max Depth (Ft) | 1,200(L) |
| Frequency (KHz) | 45-70(L) |
| More specifications | |
| Beam Width | 32° / 21°(L) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B75M 12°
Through Hull
Part Number: A80034
| Material | Bronze |
| Power (RMS) | 600W |
| Max Depth (Ft) | 900(M) |
| Frequency (KHz) | 80-130(M) |
| More specifications | |
| Beam Width | 24° / 16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B75H 12°
Through Hull
Part Number: A80035
| Material | Bronze |
| Power (RMS) | 600W |
| Max Depth (Ft) | 700(H) |
| Frequency (KHz) | 130-210(M) |
| More specifications | |
| Beam Width | 15° / 9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B75M 20°
Through Hull
Part Number: A80036
| Material | Bronze |
| Power (RMS) | 600W |
| Max Depth (Ft) | 900(M) |
| Frequency (KHz) | 80-130(M) |
| More specifications | |
| Beam Width | 24° / 16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B75H 20°
Through Hull
Part Number: A80037
| Material | Bronze |
| Power (RMS) | 600W |
| Max Depth (Ft) | 700(H) |
| Frequency (KHz) | 130-210(M) |
| More specifications | |
| Beam Width | 15° / 9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175L 0°
Through Hull
Part Number: A80042
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 2,500(L) |
| Frequency (KHz) | 40-60(L) |
| More specifications | |
| Beam Width | 32° / 21°(L) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175M 0°
Through Hull
Part Number: A80043
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 1,500(M) |
| Frequency (KHz) | 80-130(M) |
| More specifications | |
| Beam Width | 24° / 16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175H 0°
Through Hull
Part Number: A80044
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 1,000(H) |
| Frequency (KHz) | 130-210(M) |
| More specifications | |
| Beam Width | 15° / 9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175L 12°
Through Hull
Part Number: A80045
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 2,500(L) |
| Frequency (KHz) | 40-60(L) |
| More specifications | |
| Beam Width | 32° / 21°(L) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175M 12°
Through Hull
Part Number: A80046
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 1,500(M) |
| Frequency (KHz) | 80-130(M) |
| More specifications | |
| Beam Width | 24° / 16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175H 12°
Through Hull
Part Number: A80047
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 1,000(H) |
| Frequency (KHz) | 130-210(M) |
| More specifications | |
| Beam Width | 15° / 9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175L 20°
Through Hull
Part Number: A80048
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 2,500(L) |
| Frequency (KHz) | 40-60(L) |
| More specifications | |
| Beam Width | 32° / 21°(L) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175M 20°
Through Hull
Part Number: A80049
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 1,500(M) |
| Frequency (KHz) | 80-130(M) |
| More specifications | |
| Beam Width | 24° / 16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
B175H 20°
Through Hull
Part Number: A80050
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 1,000(H) |
| Frequency (KHz) | 130-210(M) |
| More specifications | |
| Beam Width | 15° / 9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
SS175L 20°
Through Hull
Part Number: A80504
| Material | Stainless Steel |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 2,500(L) |
| Frequency (KHz) | 40-60(L) |
| More specifications | |
| Beam Width | 32° / 21°(L) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The SS175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
SS175M 20°
Through Hull
Part Number: A80505
| Material | Stainless Steel |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 1,500(M) |
| Frequency (KHz) | 80-130(M) |
| More specifications | |
| Beam Width | 24° / 16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The SS175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. | |
ST800 / P120
Through Hull
Part Number: E66071
| Material | Urethane |
| Power (RMS) | - |
| Max Depth (Ft) | - |
| Frequency (KHz) | - |
| More specifications | |
| Beam Width | - |
| Records | Speed / Temperature |
| Hull Material | Fibreglass / Metal |
| Cable Length (Ft/M) | 30 / 9 |
| Deadrise Angles | 0 - 8° |
| Notes | |
| Installing an in-hull transducer, but still want speed and temp? Add one of these speed/temp sensors via the included y-cable to add the desired data into the network. Included Y-Cable is for CP300/370 installations only. | |
ST800 / P120
Through Hull
Part Number: E66072
| Material | Bronze |
| Power (RMS) | - |
| Max Depth (Ft) | - |
| Frequency (KHz) | - |
| More specifications | |
| Beam Width | - |
| Records | Speed / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 30 / 9 |
| Deadrise Angles | 0 - 8° |
| Notes | |
| Installing an in-hull transducer, but still want speed and temp? Add one of these speed/temp sensors via the included y-cable to add the desired data into the network. Included Y-Cable is for CP300/370 installations only. | |
B765LH
Through Hull
Part Number: A80014
| Material | Bronze |
| Power (RMS) | 300W(L) / 600W(H) |
| Max Depth (Ft) | 1,200(L) / 700(H) |
| Frequency (KHz) | 40-75(L) / 130-210(H) |
| More specifications | |
| Beam Width | 23°-21°(L) / 15°-9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-24° |
| Notes | |
| The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike. | |
B765LM
Through Hull
Part Number: A80015
| Material | Bronze |
| Power (RMS) | 300W(L) / 600W(H) |
| Max Depth (Ft) | 1,200(L) / 700(H) |
| Frequency (KHz) | 40-75(L) / 80-130(H) |
| More specifications | |
| Beam Width | 23°-21°(L) / 24°-16°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-24° |
| Notes | |
| The B765 is a good coastal transducer. With up to 115kHz of CHIRP range this transducer covers a number of popular fishing frequencies. The result is good target separation in deep and shallow water alike. | |
B265LH
Through Hull
Part Number: A80010
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 1,000(H) |
| Frequency (KHz) | 42-65(L) / 130-210(H) |
| More specifications | |
| Beam Width | 25°-16°(L) / 10°-6°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-20° |
| Notes | |
| The B265 is a great CHIRP thru-hull transducer. With 8 internal ceramics and up to 103kHz of total CHIRP range the B265LH is a solid choice for serious coastal and offshore fishing. | |
B265LM
Through Hull
Part Number: A80011
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 1,500(M) |
| Frequency (KHz) | 42-65(L) / 85-135(M) |
| More specifications | |
| Beam Width | 25°-16°(L) / 16°-11°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-20° |
| Notes | |
| The B265 is a great CHIRP thru-hull transducer. With 8 internal ceramics and up to 103kHz of total CHIRP range the B265LH is a solid choice for serious coastal and offshore fishing. | |
R109LH
Through Hull
Part Number: A80039
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 6,000(L) / 1,500(H) |
| Frequency (KHz) | 38-75(L) / 130-210(H) |
| More specifications | |
| Beam Width | 19°-10°(L) / 8°-4°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-25° |
| Notes | |
| With 16 internal ceramics the R109 is a powerhouse transducer. The thru-hull design ensure maximum performance by putting nothing between the transducer and the water. The added beam width of the medium frequency provides additional visibility in shallower waters. | |
R109LM
Through Hull
Part Number: A80040
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 6,000(L) / 3,000(H) |
| Frequency (KHz) | 38-75(L) / 80-130(H) |
| More specifications | |
| Beam Width | 19°-10°(L) / 13°-84°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-25° |
| Notes | |
| With 16 internal ceramics the R109 is a powerhouse transducer. The thru-hull design ensure maximum performance by putting nothing between the transducer and the water. The added beam width of the medium frequency provides additional visibility in shallower waters. | |
R509LH
Through Hull
Part Number: A80210
| Material | Urethane |
| Power (RMS) | 3,000W |
| Max Depth (Ft) | 10,000(L) / 1,500(H) |
| Frequency (KHz) | 28-60(L) / 130-210(H) |
| More specifications | |
| Beam Width | 23°-9°(L) / 8°-4°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-25° |
| Notes | |
| The R509 contains 25 internal ceramics to provide an unprecedented level of shallow and deep water sensitivity. Pairing this array of elements with the transducers maximum 3kW output and you truly have the best sport fishing transducer on the market. Choose the R509LM for additional coverage in shallow water. | |
R509LM
Through Hull
Part Number: A80211
| Material | Urethane |
| Power (RMS) | 3,000W |
| Max Depth (Ft) | 10,000(L) / 3,000(M) |
| Frequency (KHz) | 28-60(L) / 80-120(M) |
| More specifications | |
| Beam Width | 23°-9°(L) / 13°-8°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-25° |
| Notes | |
| The R509 contains 25 internal ceramics to provide an unprecedented level of shallow and deep water sensitivity. Pairing this array of elements with the transducers maximum 3kW output and you truly have the best sport fishing transducer on the market. Choose the R509LM for additional coverage in shallow water. | |
B75LH 0°
Through Hull
Part Number: T70060
| Material | Bronze |
| Power (RMS) | 300W(L) / 600W(H) |
| Max Depth (Ft) | 1,200(L) / 700(H) |
| Frequency (KHz) | 40-75(L) / 130-210(H) |
| More specifications | |
| Beam Width | 32°-21°(L) / 15°-9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B75LM 0°
Through Hull
Part Number: T70061
| Material | Bronze |
| Power (RMS) | 300W(L) / 600W(M) |
| Max Depth (Ft) | 1,200(L) / 900(M) |
| Frequency (KHz) | 40-75(L) / 80-130(M) |
| More specifications | |
| Beam Width | 32°-21°(L) / 24°-16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B75MH 0°
Through Hull
Part Number: T70062
| Material | Bronze |
| Power (RMS) | 600W(M)/(H) |
| Max Depth (Ft) | 900(M) / 700(H) |
| Frequency (KHz) | 80-130(M) / 130-210(H) |
| More specifications | |
| Beam Width | 24°-16°(M) / 15°-9° |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B75LH 12°
Through Hull
Part Number: T70063
| Material | Bronze |
| Power (RMS) | 300W(L) / 600W(H) |
| Max Depth (Ft) | 1,200(L) / 700(H) |
| Frequency (KHz) | 40-75(L) / 130-210(H) |
| More specifications | |
| Beam Width | 32°-21°(L) / 15°-9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B75LM 12°
Through Hull
Part Number: T70064
| Material | Bronze |
| Power (RMS) | 300W(L) / 600W(M) |
| Max Depth (Ft) | 1,200(L) / 900(M) |
| Frequency (KHz) | 40-75(L) / 80-130(M) |
| More specifications | |
| Beam Width | 32°-21°(L) / 24°-16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B75MH 12°
Through Hull
Part Number: T70065
| Material | Bronze |
| Power (RMS) | 600W(M)/(H) |
| Max Depth (Ft) | 900(M) / 700(H) |
| Frequency (KHz) | 80-130(M) / 130-210(H) |
| More specifications | |
| Beam Width | 24°-16°(M) / 15°-9° |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B75MH 20°
Through Hull
Part Number: T70068
| Material | Bronze |
| Power (RMS) | 600W(M)/(H) |
| Max Depth (Ft) | 900(M) / 700(H) |
| Frequency (KHz) | 80-130(M) / 130-210(H) |
| More specifications | |
| Beam Width | 24°-16°(M) / 15°-9° |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B75s offer high resolution benefits of CHIRP technology at an affordable price. Available in a number of low-profile, tilted element configurations these transducers are great options for small and medium sized trailerable boats. They also offer wider beam angles than some more expensive transducers, providing greater coverage below the vessel. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B75 with the necessary Single Operation Cable (A80328) or pair two B75s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175LH 0°
Through Hull
Part Number: T70069
| Material | Bronze |
| Power (RMS) | 1,000W(L/H) |
| Max Depth (Ft) | 2,500(L) / 1,000(H) |
| Frequency (KHz) | 40-60(L) / 130-210(H) |
| More specifications | |
| Beam Width | 32°-21°(L) / 15°-9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175LM 0°
Through Hull
Part Number: T70070
| Material | Bronze |
| Power (RMS) | 1,000W(L/M) |
| Max Depth (Ft) | 2,500(L) / 1,500(M) |
| Frequency (KHz) | 40-60(L) / 85-135(M) |
| More specifications | |
| Beam Width | 32°-21°(L) / 24°-16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175MH 0°
Through Hull
Part Number: T70071
| Material | Bronze |
| Power (RMS) | 1,000W(M/H) |
| Max Depth (Ft) | 1,500(M) / 1,000(H) |
| Frequency (KHz) | 85-135(M) / 130-210(H) |
| More specifications | |
| Beam Width | 24°-16°(M) / 15°9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 0-7° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175LH 12°
Through Hull
Part Number: T70072
| Material | Bronze |
| Power (RMS) | 1,000W(L/H) |
| Max Depth (Ft) | 2,500(L) / 1,000(H) |
| Frequency (KHz) | 40-60(L) / 130-210(H) |
| More specifications | |
| Beam Width | 32°-21°(L) / 15°-9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175LM 12°
Through Hull
Part Number: T70073
| Material | Bronze |
| Power (RMS) | 1,000W(L/M) |
| Max Depth (Ft) | 2,500(L) / 1,500(M) |
| Frequency (KHz) | 40-60(L) / 85-135(M) |
| More specifications | |
| Beam Width | 32°-21°(L) / 24°-16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175MH 12°
Through Hull
Part Number: T70074
| Material | Bronze |
| Power (RMS) | 1,000W(M/H) |
| Max Depth (Ft) | 1,500(M) / 1,000(H) |
| Frequency (KHz) | 85-135(M) / 130-210(H) |
| More specifications | |
| Beam Width | 24°-16°(M) / 15°9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 8-15° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175LH 20°
Through Hull
Part Number: T70075
| Material | Bronze |
| Power (RMS) | 1,000W(L/H) |
| Max Depth (Ft) | 2,500(L) / 1,000(H) |
| Frequency (KHz) | 40-60(L) / 130-210(H) |
| More specifications | |
| Beam Width | 32°-21°(L) / 15°-9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175LM 20°
Through Hull
Part Number: T70076
| Material | Bronze |
| Power (RMS) | 1,000W(L/M) |
| Max Depth (Ft) | 2,500(L) / 1,500(M) |
| Frequency (KHz) | 40-60(L) / 85-135(M) |
| More specifications | |
| Beam Width | 32°-21°(L) / 24°-16°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
B175MH 20°
Through Hull
Part Number: T70077
| Material | Bronze |
| Power (RMS) | 1,000W(M/H) |
| Max Depth (Ft) | 1,500(M) / 1,000(H) |
| Frequency (KHz) | 85-135(M) / 130-210(H) |
| More specifications | |
| Beam Width | 24°-16°(M) / 15°9°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 33 / 10 |
| Deadrise Angles | 16-24° |
| Notes | |
| The B175s provide uncompromised 1kW CHIRP performance in a number of tilted element thru-hull configurations. Ideal for trailerable boats, these low-profile transducers can sit on trailer rollers/bunks without damage. Given their flush design, low-profile transducers may be more easily subjected to surface aeration at higher speeds. Use a single B175 with the necessary Single Operation Cable (A80328) or pair two B175s together with the Paired CHIRP Transducer Y-Cable (A102146). | |
TM265LH-Widebeam
Transom Mount
Part Number: A80318
| Material | Urethane |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 800(H) |
| Frequency (KHz) | 42-65(L) / 150-250(H) |
| More specifications | |
| Beam Width | 25° / 16°(L) / 25°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 6 / 2* |
| Deadrise Angles | 0-25° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
B175H-Widebeam 0°
Through Hull
Part Number: A80319
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 800(H) |
| Frequency (KHz) | 150-250(M) |
| More specifications | |
| Beam Width | 25° |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 6 / 2* |
| Deadrise Angles | 0-7° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
B175H-Widebeam 12°
Through Hull
Part Number: A80320
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 800(H) |
| Frequency (KHz) | 150-250(M) |
| More specifications | |
| Beam Width | 25° |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 6/2* |
| Deadrise Angles | 8-15° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
B175H-Widebeam 20°
Through Hull
Part Number: A80321
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 800(H) |
| Frequency (KHz) | 150-250(M) |
| More specifications | |
| Beam Width | 25° |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 6/2* |
| Deadrise Angles | 16-24° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
SS175H-Widebeam 20°
Through Hull
Part Number: A80506
| Material | Stainless Steal |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 800(H) |
| Frequency (KHz) | 150-250(M) |
| More specifications | |
| Beam Width | 25° |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 6/2* |
| Deadrise Angles | 16-24° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
B275LH-Widebeam
Through Hull
Part Number: A80322
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 800(H) |
| Frequency (KHz) | 42-65(L) / 150-250(H) |
| More specifications | |
| Beam Width | 25°-16°(L) / 25°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood |
| Cable Length (Ft/M) | 6/2* |
| Deadrise Angles | 0-20° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
R109LH-Widebeam
Through Hull
Part Number: A80323
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 6,000(L) / 800(H) |
| Frequency (KHz) | 38-75(L) / 150-250(H) |
| More specifications | |
| Beam Width | 19°-10°(L) / 25°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 6/2* |
| Deadrise Angles | 0-25° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
R509LH-Widebeam
Through Hull
Part Number: A80324
| Material | Urethane |
| Power (RMS) | 3,000W |
| Max Depth (Ft) | 10,000(L) / 800(H) |
| Frequency (KHz) | 28-60(L) / 150-250(H) |
| More specifications | |
| Beam Width | 23°-9°(L) / 25°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 6 / 2*10 |
| Deadrise Angles | 0-25° |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
PM275LH-Widebeam
Pocket / Keel Mount
Part Number: A80325
| Material | Bronze |
| Power (RMS) | 1,000W |
| Max Depth (Ft) | 3,000(L) / 800(H) |
| Frequency (KHz) | 42-65(L) / 150-250(H) |
| More specifications | |
| Beam Width | 25°-16°(L) / 25°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 6 / 2* |
| Deadrise Angles | Installation Dependent |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
PM111LH-Widebeam
Pocket / Keel Mount
Part Number: A80326
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 6,000(L) / 800(H) |
| Frequency (KHz) | 38-75(L) / 150-250(H) |
| More specifications | |
| Beam Width | 25°-16°(L) / 25°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 6 / 2* |
| Deadrise Angles | Installation Dependent |
| Notes | |
| Airmar's exclusive wide beam transducers features a constant 25 degree beam angle for the entire High CHIRP spectrum. The result is improved shallow water coverage while maintaining the high resolution capabilities associated with the High CHIRP channel. Available in a variety of configurations, there is a wide beam transducer solution for almost any vessel. *All wide beam products come with a 2M pigtail off the transducer. Pair with a CHIRP Transducer Extension Cable (3, 5 or 10M) for a complete transducer installation. | |
R409LM-Ultra Widebeam
Through Hull
Part Number: A80377
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 3,000(L) / 3,000(M) |
| Frequency (KHz) | 40-60(L) / 80-130(M) |
| More specifications | |
| Beam Width | 40°(L) / 8-13°(M) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass / Wood / Metal |
| Cable Length (Ft/M) | 6 / 2* |
| Deadrise Angles | 0-25° |
| Notes | |
| These tournament series ultra-wide beam transducers reveal more fish in the water column than ever before. The constant 40 degree low frequency beam width provides ample subsurface coverage in both shallow and deep waters alike. | |
PM411LM-Ultra Widebeam
Pocket / Keel Mount
Part Number: A80378
| Material | Urethane |
| Power (RMS) | 2,000W |
| Max Depth (Ft) | 3,000(L) / 3,000(M) |
| Frequency (KHz) | 40-60(L) / 80-130(M) |
| More specifications | |
| Beam Width | 40°(L) / 8-13°(H) |
| Records | Depth / Temperature |
| Hull Material | Fibreglass |
| Cable Length (Ft/M) | 6 / 2* |
| Deadrise Angles | Installation Dependent |
| Notes | |
| These tournament series ultra-wide beam transducers reveal more fish in the water column than ever before. The constant 40 degree low frequency beam width provides ample subsurface coverage in both shallow and deep waters alike. | |